Powered by one of the most reliable Diesel engines in the world the Yanmar 4TNV98T engine with high quality 3 phase 4-Pole brushless alternator, this is one of the most cost-effective and high-performance generators you can buy!
 
Buy with peace of mind, ABLE’s range of Yanmar-powered diesel generators are backed by a 2 Years or 2,000 Hours Warranty.
 
Key Features:
Reliable Engine: Equipped with a world-renowned reliable Yanmar 4 Cylinder Diesel 4TNV98T engine.
Robust Design: Tough-built, super-silenced, and weather-resistant canopy designed for outdoor.
Watercooled: So it will run and withstands extremely hot conditions while it also extends the life of the engine over time.
Stable Operation:  12 hours continuous stable power at prime load. The low 1500 RPM engine generates a more stable operation.
Silent Operation:  62 dBA at 7 metres, just similar to a normal conversation.
Fuel efficiency: 9.3 Litres/Hour at prime load. Lower fuel consumption. Lower cost. A savings you can’t ignore!
Highest Safety Standards: Australian Safety Standards compliant.
Easy Transportability: Designed with forklift slots for easy transportation.
Easy to Use: The digital control panel makes the generator easy to use.
2 YEARS OR 2,000 HOURS GENERATOR WARRANTY.
 
Prime Power :
32kW / 40kVA 415Volts 55Amps
Standby Power :
35.6kW / 44.5kVA
Power Factor :
0.8
Phase Voltage :
Three Phase 415 Volt
Frequency :
50 Hertz
Engine :
Yanmar 4TNV98T 
RPM :
1500/min
Cooling Method :
Water Cooled - Rated For Australia's North
Alternator :
High Quality 3 Phase 4 Pole Brushless Synchronous -/c AVR
Starter System :
12-volt Electric - Battery Included
Controller :
Comap AMF20 (European Made)
 
2 Wire / Remote Start Capable
 
Over Temperature Protection
 
Over Current Protection
 
Low Oil Protection
Safety Systems :
Battery Isolator
 
Emergency Stop
 
Failsafe Shutdown Fuel Solenoid
Noise Level :
62 dBA at 7 metres
Fuel Tank Capacity :
110 Litres (-/c Fuel Gauge)
Running Time :
12 Hours Continuous (prime load)
Fuel Consumption :
9.3 litres/hour (prime load)
Chassis Enclosure :
Lockable
 
Sound Deadening Throughout
 
Weather-Resistant Powder Coating
 
Stainless Steel Fittings
 
External Use
Mine Site Ready Bunding :
Yes
ATS (Mains Failure) :
Easy Connect Plug (ATS Box Optional)
Single Phase Outlets :
2 x 15 Amp IP66
Three Phase Outlets :
1 x 20 Amp IP66
 
1 x 32 Amp IP66
Hardwire Terminals :
Yes
RCD / RCBO :
Australian Standard (IP67 Enclosed)
Options :
Automatic Start Systems
 
GSM
 
Timer
 
Wireless Remote
 
Solar System Compatible (Majority)
 
ATS (Mains Failure Detection / Auto Transfer Switch)
 
Minespec Padlockable Battery Isolator
Weight :
900 kg
Dimensions :
180 L x 76 W x 121 H cm